<![CDATA[Cobra Automotive: New Products - Shelby Style Traction Bars]]> https://store.cobraautomotive.com Sat, 18 Apr 2026 04:57:45 +0000 <![CDATA[1965-66 Stock Override bars Shelby]]> https://store.cobraautomotive.com/1965-66-stock-override-bars-shelby/ Fri, 28 Sep 2012 21:12:40 +0000 https://store.cobraautomotive.com/1965-66-stock-override-bars-shelby/ These traction bars can be used on any early Mustang chassis.  They are replacement override traction bars as used on 1965-66 Shelby Mustangs.  They will control axle wind-up and wheel hop at a very reasonable cost while maintaining that original vintage correct look.&nbs..

Price: $169.95

]]> These traction bars can be used on any early Mustang chassis.  They are replacement override traction bars as used on 1965-66 Shelby Mustangs.  They will control axle wind-up and wheel hop at a very reasonable cost while maintaining that original vintage correct look.&nbs..

Price: $169.95

]]> These traction bars can be used on any early Mustang chassis.  They are replacement override traction bars as used on 1965-66 Shelby Mustangs.  They will control axle wind-up and wheel hop at a very reasonable cost while maintaining that original vintage correct look.&nbs..]]> <![CDATA[Shelby Style Underride Traction Bars 1967-70 with 2-7/8'' axle tubes, with rod end upgrade, satin black powder coat finish]]> https://store.cobraautomotive.com/shelby-style-underride-traction-bars-1967-70-with-2-7-8-axle-tubes-with-rod-end-upgrade-satin-black-powder-coat-finish/ Fri, 28 Sep 2012 21:07:52 +0000 https://store.cobraautomotive.com/shelby-style-underride-traction-bars-1967-70-with-2-7-8-axle-tubes-with-rod-end-upgrade-satin-black-powder-coat-finish/ Pictured: Shelby Style Underride Traction Bars: 1965-66 with 2-3/8'' axle tubes, with rod end upgrade, satin black powder coat finish (top); 1967-70 with 2-7/8'' axle tubes, with rod end upgrade, satin black powder coat finish (bottom); Part #s 100-TMK3 and 100-TMK4 respectively.

These traction bars can be used on any early Mustang chassis.  They are an exact replacement underride traction bar as used on 1966 Shelby Mustangs.  They will control axle wind-up and wheel hop at a very reasonable cost while maintaining that original vintage correct loo..

Price: $570.75

]]> Pictured: Shelby Style Underride Traction Bars: 1965-66 with 2-3/8'' axle tubes, with rod end upgrade, satin black powder coat finish (top); 1967-70 with 2-7/8'' axle tubes, with rod end upgrade, satin black powder coat finish (bottom); Part #s 100-TMK3 and 100-TMK4 respectively.

These traction bars can be used on any early Mustang chassis.  They are an exact replacement underride traction bar as used on 1966 Shelby Mustangs.  They will control axle wind-up and wheel hop at a very reasonable cost while maintaining that original vintage correct loo..

Price: $570.75

]]> These traction bars can be used on any early Mustang chassis.  They are an exact replacement underride traction bar as used on 1966 Shelby Mustangs.  They will control axle wind-up and wheel hop at a very reasonable cost while maintaining that original vintage correct loo..]]> <![CDATA[Shelby Style Underride Traction Bars 1965-66 with 2-3/8'' axle tubes, with rod end upgrade, satin black powder coat finish]]> https://store.cobraautomotive.com/shelby-style-underride-traction-bars-1965-66-with-2-3-8-axle-tubes-with-rod-end-upgrade-satin-black-powder-coat-finish/ Fri, 28 Sep 2012 21:06:37 +0000 https://store.cobraautomotive.com/shelby-style-underride-traction-bars-1965-66-with-2-3-8-axle-tubes-with-rod-end-upgrade-satin-black-powder-coat-finish/ Pictured: Shelby Style Underride Traction Bars: 1965-66 with 2-3/8'' axle tubes, with rod end upgrade, satin black powder coat finish (top); 1967-70 with 2-7/8'' axle tubes, with rod end upgrade, satin black powder coat finish (bottom); Part #s 100-TMK3 and 100-TMK4 respectively.

These traction bars can be used on any early Mustang chassis.  They are an exact replacement underride traction bar as used on 1966 Shelby Mustangs.  They will control axle wind-up and wheel hop at a very reasonable cost while maintaining that original vintage correct loo..

Price: $570.75

]]> Pictured: Shelby Style Underride Traction Bars: 1965-66 with 2-3/8'' axle tubes, with rod end upgrade, satin black powder coat finish (top); 1967-70 with 2-7/8'' axle tubes, with rod end upgrade, satin black powder coat finish (bottom); Part #s 100-TMK3 and 100-TMK4 respectively.

These traction bars can be used on any early Mustang chassis.  They are an exact replacement underride traction bar as used on 1966 Shelby Mustangs.  They will control axle wind-up and wheel hop at a very reasonable cost while maintaining that original vintage correct loo..

Price: $570.75

]]> These traction bars can be used on any early Mustang chassis.  They are an exact replacement underride traction bar as used on 1966 Shelby Mustangs.  They will control axle wind-up and wheel hop at a very reasonable cost while maintaining that original vintage correct loo..]]> <![CDATA[Shelby Style Underride Traction Bars 1967-70 with 2-7/8'' axle tubes, stock rubber bushings, painted finish]]> https://store.cobraautomotive.com/shelby-style-underride-traction-bars-1967-70-with-2-7-8-axle-tubes-stock-rubber-bushings-painted-finish/ Fri, 28 Sep 2012 21:02:22 +0000 https://store.cobraautomotive.com/shelby-style-underride-traction-bars-1967-70-with-2-7-8-axle-tubes-stock-rubber-bushings-painted-finish/ Pictured: Shelby Style Underride Traction Bars: 1965-66 with 2-3/8'' axle tubes, stock rubber bushings, painted finish (top); 1967-70 with 2-7/8'' axle tubes, stock rubber bushings, painted finish (bottom); Part #s 100-TMK1 and 100-TMK2 respectively.

These traction bars can be used on any early Mustang chassis.  They are an exact replacement underride traction bar as used on 1966 Shelby Mustangs.  They will control axle wind-up and wheel hop at a very reasonable cost while maintaining that original vintage correct loo..

Price: $139.95

]]> Pictured: Shelby Style Underride Traction Bars: 1965-66 with 2-3/8'' axle tubes, stock rubber bushings, painted finish (top); 1967-70 with 2-7/8'' axle tubes, stock rubber bushings, painted finish (bottom); Part #s 100-TMK1 and 100-TMK2 respectively.

These traction bars can be used on any early Mustang chassis.  They are an exact replacement underride traction bar as used on 1966 Shelby Mustangs.  They will control axle wind-up and wheel hop at a very reasonable cost while maintaining that original vintage correct loo..

Price: $139.95

]]> These traction bars can be used on any early Mustang chassis.  They are an exact replacement underride traction bar as used on 1966 Shelby Mustangs.  They will control axle wind-up and wheel hop at a very reasonable cost while maintaining that original vintage correct loo..]]> <![CDATA[Shelby Style Underride Traction Bars 1965-66 with 2-3/8'' axle tubes, stock rubber bushings, painted finish]]> https://store.cobraautomotive.com/shelby-style-underride-traction-bars-1965-66-with-2-3-8-axle-tubes-stock-rubber-bushings-painted-finish/ Fri, 28 Sep 2012 20:54:47 +0000 https://store.cobraautomotive.com/shelby-style-underride-traction-bars-1965-66-with-2-3-8-axle-tubes-stock-rubber-bushings-painted-finish/ Pictured: Shelby Style Underride Traction Bars: 1965-66 with 2-3/8'' axle tubes, stock rubber bushings, painted finish (top); 1967-70 with 2-7/8'' axle tubes, stock rubber bushings, painted finish (bottom); Part #s 100-TMK1 and 100-TMK2 respectively.

These traction bars can be used on any early Mustang chassis.  They are an exact replacement underride traction bar as used on 1966 Shelby Mustangs.  They will control axle wind-up and wheel hop at a very reasonable cost while maintaining that original vintage correct loo..

Price: $176.67

]]> Pictured: Shelby Style Underride Traction Bars: 1965-66 with 2-3/8'' axle tubes, stock rubber bushings, painted finish (top); 1967-70 with 2-7/8'' axle tubes, stock rubber bushings, painted finish (bottom); Part #s 100-TMK1 and 100-TMK2 respectively.

These traction bars can be used on any early Mustang chassis.  They are an exact replacement underride traction bar as used on 1966 Shelby Mustangs.  They will control axle wind-up and wheel hop at a very reasonable cost while maintaining that original vintage correct loo..

Price: $176.67

]]> These traction bars can be used on any early Mustang chassis.  They are an exact replacement underride traction bar as used on 1966 Shelby Mustangs.  They will control axle wind-up and wheel hop at a very reasonable cost while maintaining that original vintage correct loo..]]>